How To Install Levolor Blinds With Hidden Brackets

How To Install Levolor Blinds With Hidden Brackets

How To Install Levolor Blinds With Hidden Brackets

Welcome to our step-by-step guide on installing Levolor blinds with hidden brackets. Levolor blinds are renowned for their durability, functionality, and aesthetic appeal. The hidden bracket system offers a sleek and streamlined look, with no visible hardware. Whether you are a seasoned DIY enthusiast or a beginner, this article will provide you with the necessary instructions to complete the installation seamlessly.


  • What You Will Need

  • Measuring and Preparing

  • Mounting the Hidden Brackets

  • Installing the Levolor Blinds

  • FAQ: Frequently Asked Questions

What You Will Need

Before you begin the installation process, gather the necessary tools and materials:

  • Tape Measure: To accurately measure the window dimensions.
  • Drill: With appropriate drill bits for your wall type.
  • Screwdriver: A Phillips or flathead screwdriver, depending on the hardware provided.
  • Level: To ensure your blinds are straight and properly aligned.
  • Pencil: For marking the installation points on the wall.
  • Levolor Blinds: Ensure you have the correct size and style for your window.
  • Hidden Brackets Kit: This should include the brackets, screws, and any additional hardware needed.

Measuring and Preparing

The first step in installing your Levolor blinds is to measure the window correctly. Follow these guidelines to ensure an accurate measurement:

  1. Measure the width of the window frame from inside edge to inside edge. Take three measurements (top, middle, and bottom) and use the smallest measurement.
  2. Measure the height of the window frame from top to bottom. Again, take three measurements (left, middle, and right) and use the longest measurement.
  3. Note down these measurements, as they will be necessary when purchasing the correct size of Levolor blinds.

Next, prepare the window area by clearing any obstructions that may interfere with the installation process. Remove any existing blinds or window coverings and clean the window frame and surrounding area.

Mounting the Hidden Brackets

Now that you have your Levolor blinds and hidden brackets kit ready, it’s time to install the hidden brackets:

  1. Hold one of the hidden brackets against the top-left corner of the window frame. Make sure the bracket sits flush against the frame and mark the screw holes with a pencil.
  2. Repeat this process for the top-right corner of the window frame.
  3. If your window is wider, you may need to install additional hidden brackets. Use a measuring tape to evenly space out the brackets along the top of the window frame, marking the screw hole locations as you go.
  4. Drill pilot holes into the marked screw hole locations using an appropriate drill bit. Ensure the pilot holes are slightly smaller than the provided screws to ensure a secure fit.
  5. Align the hidden bracket with the pilot holes and attach it to the window frame using the provided screws. Repeat this process for all other hidden brackets.

Installing the Levolor Blinds

Once the hidden brackets are securely installed, it’s time to hang your Levolor blinds:

  1. Hold the Levolor blinds with the front side facing you and the lift cord facing towards the room.
  2. Align the back of the blinds with the hidden brackets and hook them onto the brackets one by one.
  3. Ensure that the blinds are centered and level. Adjust as necessary.
  4. Once the blinds are securely attached to the hidden brackets, test their functionality by pulling the lift cord gently.
  5. If the blinds operate smoothly and hang evenly, your installation is complete.

FAQ: Frequently Asked Questions

1. Can I install Levolor blinds on all types of windows?

Levolor blinds can be installed on most standard windows, including single-hung, double-hung, casement, and sliding windows. However, it is essential to measure your window accurately and choose the appropriate size of Levolor blinds.

2. Are hidden brackets necessary for Levolor blinds?

No, hidden brackets are not necessary for Levolor blinds, as they can also be installed using standard brackets. However, hidden brackets offer a more streamlined appearance and eliminate the need for visible hardware.

3. Can I install Levolor blinds without drilling into the window frame?

To ensure proper stability and functionality, it is recommended to mount Levolor blinds using screws and brackets. However, there are alternatives available, such as adhesive hooks, for temporary or non-permanent installations.

4. Can Levolor blinds be installed outside the window frame?

Yes, Levolor blinds can be installed outside the window frame. The installation process will vary slightly, as you will need to measure and mount the brackets on the wall or window casing rather than the window frame itself.

5. How do I clean and maintain Levolor blinds?

To clean Levolor blinds, gently dust or vacuum them regularly to remove any accumulated dirt or debris. For thorough cleaning, use a mild soap solution and a soft cloth to wipe down the blinds. Avoid using harsh chemicals or abrasive materials, as they may damage the blinds’ surface.

Congratulations! You have successfully installed your Levolor blinds with hidden brackets. Enjoy the enhanced aesthetics and functionality they bring to your living space. If you have any further questions or need assistance, refer to the Levolor installation guide or consult a professional blinds installer.

We hope this step-by-step guide has been helpful. Happy decorating!

See also  How To Download Onlyfans App On Iphone

Post Comment