How To Get Water Out Of Charging Port: Sound Advice to Save Your Device

Our smartphones have become indispensable parts of our lives and we rely on them for a variety of tasks, from communication to entertainment. However, accidents happen, and one common mishap is getting water in the charging port. If water enters the charging port, it can cause damage to the device and prevent it from charging properly. In this article, we will provide you with a comprehensive guide on how to get water out of the charging port and save your beloved device from potential harm.

Contents:

1. Assess the extent of water damage

2. Power off your device

3. Wipe off any visible water

4. Use compressed air or a vacuum cleaner

5. Utilize moisture-absorbing materials

6. Wait for the charging port to dry naturally

7. Test your device

8. Preventive measures to avoid water damage in the future

1. Assess the extent of water damage

Before you start drying your charging port, you need to assess the extent of the water damage. Check if the port is completely submerged or if only a small amount of water has entered. If your device has come into contact with a large amount of water or submerged in water for an extended period, it is advisable to seek professional help rather than attempting to fix it yourself. In such cases, taking your device to an authorized service center will increase the chances of successful repair.

2. Power off your device

The first step in saving your device is to turn it off immediately. Water coming into contact with live electronic components can cause short circuits and further damage to the device. Turning off your device will prevent any electrical current from flowing through the charging port and minimize the risk of irreversible damage.

3. Wipe off any visible water

Once the device is powered off, use a clean, dry cloth or a non-abrasive towel to carefully wipe off any visible water on the exterior of your device. Do not apply excessive pressure as it may further push the water into the charging port. Make sure to be thorough in your cleaning process, also wipe the surrounding areas around the port.

4. Use compressed air or a vacuum cleaner

Next, you can use compressed air or a vacuum cleaner with a low suction setting to remove any remaining water from the charging port. Hold your device firmly and aim the nozzle of the compressed air or vacuum cleaner towards the port. Gently blow or suction the air to dislodge and eliminate the water particles present in the charging port. Be cautious not to get too close or insert the nozzle into the port to prevent any potential damage.

5. Utilize moisture-absorbing materials

Moisture-absorbing materials can be effective in drawing out any residual moisture from the charging port. One commonly used material is uncooked rice. Fill a small bag or a container with uncooked rice and place your device into it, ensuring that the charging port is fully submerged in the rice. Leave your device in the rice for at least 24 to 48 hours, as rice absorbs moisture slowly. Alternatively, you can use moisture-absorbing silica gel packets, which are often found in shoeboxes or electronic packaging.

6. Wait for the charging port to dry naturally

After utilizing moisture-absorbing materials, it’s important to allow the charging port to dry naturally. Avoid the temptation to use heat sources like hair dryers or heaters, as excessive heat can damage the internal components of your device. Instead, place your device in a cool, dry area with good air circulation. Patience is key, as the drying process may take a few days depending on the severity of water damage.

7. Test your device

Once you are confident that the charging port has dried completely, it’s time to test your device. Connect your device to a charger and observe if it is charging properly. If there are no issues, you have successfully removed the water from the charging port. However, if the device continues to experience charging problems or other issues, it is recommended to contact a professional or visit an authorized service center to assess and repair the device.

8. Preventive measures to avoid water damage in the future

Prevention is always better than cure. To avoid water damage in the future, consider the following preventive measures:

i) Invest in a waterproof case

A waterproof case can provide an additional layer of protection for your device, especially if you are using it in water-prone environments such as the beach or pool. These cases are designed to keep water out and minimize the risk of damage to your device.

ii) Be cautious around water

Avoid using your device near water sources, such as sinks, bathtubs, or pools, where accidental spills or immersion can occur. Additionally, be mindful when using your device during rainy weather or in humid environments where moisture can seep into the charging port.

iii) Regularly clean the charging port

Keeping your charging port clean and free from dust and debris reduces the chances of water getting trapped in the port and causing damage. Use a clean, dry toothbrush or a cotton swab to carefully remove any dirt or lint that may have accumulated inside the port.

iv) Consider waterproof accessories

Opting for waterproof accessories, such as charging cables or adapters, can provide an added layer of protection for your device. These accessories are designed to withstand contact with water, minimizing the risk of water damage to your device.

v) Keep your device away from extreme temperatures

Extreme temperatures, both hot and cold, can affect the performance of your device and make it susceptible to water damage. Avoid leaving your device in direct sunlight or exposing it to extreme heat or freezing temperatures.

FAQs

Q1. Can I use a hairdryer to speed up the drying process?

A1. It is not recommended to use a hairdryer or any other heat sources to dry your charging port, as excessive heat can damage the internal components of your device. Allow the charging port to dry naturally in a cool, dry area.

Q2. Is there any specific type of rice I should use for moisture absorption?

A2. No, any kind of uncooked rice will work for moisture absorption. Rice acts as a desiccant and helps in drawing out moisture from the charging port.

Q3. What should I do if my device does not charge even after removing the water from the charging port?

A3. If your device continues to experience charging problems or other issues after following the steps mentioned in this article, it is advisable to seek professional help. Contacting an authorized service center will provide you with the best chance of successful repair.

Q4. Can I use a vacuum cleaner with high suction to remove water from the charging port?

A4. No, using a vacuum cleaner with high suction can damage the sensitive components inside the charging port. Always use a vacuum cleaner with a low suction setting or opt for compressed air to remove water from the port.

Q5. How long does it take for the charging port to dry completely?

A5. The time required for the charging port to dry completely depends on the severity of water damage. It is recommended to wait for at least 24 to 48 hours before attempting to charge your device again.